For a show I had this past weekend I needed a way to show my embroidery hoop art & banners so I quickly & easily put together 2 hanging displays made from things I had around the house. I had 6' of plastic mesh left over from another project (cut it in half to have 2 -3' pieces). I cut down 2 - 2X4's to 36" (the width of the mesh) and then cut them to in half lengthwise using a table saw, so I then had 4 pieces roughly 2X2X36. Next I stapled the top of the mesh to one piece of wood & did the same on the bottom, repeat for the 2nd hanger. I drilled a little starter holes & attached 2 eye hooks on each hanger & voila done!